Prestige APS25Z Installation And Reference Manual page 7

Vehicle security / keyless entry system
Hide thumbs Also See for APS25Z:
Table of Contents

Advertisement

Detailed Descriptions: Setup Options
Security Control (Bank 2) (cont.)
Feature 5: Automatic Arming
Function: Set the system to arm automatically after exiting the vehicle.
Setting Choices:
Option 1 - System will arm and doors will lock only when the alarm is armed from the remote control.
Option 2 - System will arm automatically 1 minute after the last door is closed, and when the alarm is
armed from the remote control.
Option 3 - System will arm and lock doors automatically 1 minute after the last door is closed, and when
the alarm is armed from the remote control.
Feature 6: Park Light / Trunk Relay Function
Function: Reverse the functionality of the trunk and park light outputs (i.e. when the built-in relay is needed for the
trunk connection but not needed for the park light connection.)
Setting Choices:
Option 1 - Functionality follows default settings.
Option 2 - The Trunk Release Output (Dark Blue) wire works with the Parking Lights function; the Parking
Lights Input (White/Red) and Parking Lights Output (White) wires work with the trunk release function.
Feature 7: Silent Choice
Function: Set audible beeps on or off when arming and disarming the system.
Setting Choices:
Option 1 - Pressing Lock or Unlock at any time will perform the function with audible beeps.
Option 2 - Pressing Lock or Unlock for 1.5sec on remote will control system without an audible beep.
Option 3 - First press of Lock or Unlock on the remote control will perform the function without an audible
beep. Second press within 10sec will result in audible beeps.
Feature 8: Exterior Illumination
Function: Set the parking lights to remain on for 30 seconds when the doors are locked or unlocked with the remote
control.
Setting Choices:
Option 1 - The lights will function normally.
Option 2 - The lights will remain on for 30 seconds when the doors are locked with the remote control.
Option 3 - The lights will remain on for 30 seconds when the doors are unlocked with the remote control.
Option 4 - The lights will remain on for 30 seconds when the doors are locked or unlocked with the remote
control.
APS25Z_RevA_08/18
TM
See page 8 for Programming Instruction.
7

Advertisement

Table of Contents
loading

Table of Contents