Additional 2-Way Lcd Remote Control Functions - Prestige PE2RELCDZ Owner's Manual

Additional 2-Way LCD Remote Control Functions

Display Illumination
Press and hold the
seconds.
Melody / Vibration Mode
To have the remote control vibrate or play a melody tone each time it receives a
response from the vehicle press and hold
Battery Save Mode
While in POWER SAVE MODE the 2-Way LCD transmitter will NOT look for any
incoming signals from the main unit until a button is pressed. The LCD screen will
display SAVE ON to indicate that power save mode is ON. To enter power save mode
press and hold
Stopping LCD Trigger Melody
To stop the alarm trigger melody if the system has been triggered WITHOUT
disarming the system, press
the vehicle at this time and the alarm will silence.
Parking Meter Countdown
The parking meter countdown timer has 6 preset times, to access the preset times
and begin countdown press and hold
OPT
press of
Adjusting the Clock and Timer Settings
The clock, alarm clock and programmable countdown timer are accessed through the
Function Menu. Press and hold
you have accessed the feature menu press and release
feature and follow the steps below to adjust the settings for each. Press and hold
for 5 seconds to exit the menu.
Clock Hour
Clock Minute
Alarm Clock Hour
Alarm Clock Minute
Alarm Clock Alert Tone
Alarm Clock ON / OFF
Countdown Timer Hour
Countdown Timer Minute
Shutdown Alert Tone
Countdown Timer ON / OFF
Remote Start Alert Tone
6
button for one (1) second. The display will illuminate for five (5)
F
then press .
F
button one time only, this will send a lock command to
will increase the countdown time.
then press and release .
F
then press and release
F
for 5 seconds to access the function menu, once
F
Press to increase or
Press to increase or
Press to increase or
Press to increase or
Press or
Press to turn ON or
Press to increase or
Press to increase or
Press or
Press to turn ON or
Press or
FLRS_FLCAN(RS)_PE2RELCDZ Owners REV . 0
OPT
to scroll through each
F
OPT
OPT
OPT
OPT
OPT
to change tone
OPT
to turn OFF
OPT
OPT
OPT
to change tone
OPT
to turn OFF
OPT
to change tone
, each additional
F
to decrease
to decrease
to decrease
to decrease
to decrease
to decrease