OneTouch Ultra Owner's Booklet page 68

MESSAGE
60
WhAT IT MEANS
Flashing time means the
meter has lost power and
entered the setting mode.
The meter has detected
that the temperature is
below the system operating
range. Do Not perform a
test until the meter and test
strips reach a temperature
within the operating range
of 43–111°F (6–44°C).
The meter has detected that
the temperature is above
the system operating range.
Do Not perform a test until
the meter and test strips
reach a temperature within
the operating range of
43–111°F (6–44°C).
ACTION
You must reset the time,
time format and date. See
Meter Set-up, pages 42–47.
Confirm that your meter
is set in mg/dL. If not,
call LifeScan Customer
Service at
1 800 227-8862.
Note to users of OneTouch
Diabetes Management
Software: Do Not transfer
data from a meter that has
experienced a loss of power.
Call LifeScan Customer
Service at 1 800 227-
8862 for more information.
Repeat the test after the
meter and test strips have
reached a temperature
within the operating range.
Repeat the test after the
meter and test strips have
reached a temperature
within the operating
range.
®