OneTouch Ultra Owner's Booklet page 47

NOTE: While in the communication mode, you will be unable to
perform a blood glucose test. If the meter is in either memory or
setting mode, it will not respond to computer commands.
Step 3
Transfer Data.
Follow the instructions in the
OneTouch Diabetes Management
®
Software User's Manual to initiate the
data transfer command.
appear on the meter display when
the first command is received, indicating that the meter is
in the communication mode. If the command is not received
within two minutes, the meter will turn itself off. Pressing the
button will also turn the meter off.
To learn more about OneTouch
Software or to obtain a OneTouch
call LifeScan Data Management Line at 1 800 382-7226
or visit us at www.OneTouchDiabetes.com.
O
will
Diabetes Management
®
Interface Cable separately,
®
39