OneTouch Ultra Owner's Booklet page 30

Step 1
Insert a Lancet.
Turn the Lancing Device Cap
counterclockwise to remove it.
Insert the lancet into the lancet holder
and push down firmly until it is fully
seated. Do Not twist the lancet. Remove
the protective cover from the lancet
(see instructions for your lancets).
Replace the Lancing Device Cap. Turn it
clockwise until it is snug.
Adjust the puncture depth setting if
necessary. Twist the depth adjustment
knob toward the smaller bumps for a
shallower puncture or toward the larger
bumps for a deeper puncture.
22