Step 1
Insert a test strip into the meter.
Insert a test strip, contact bars
end first and facing up, into
the test port. Push it all the way
in until it will go no further.
The meter will turn on and the
display check will appear briefly.
mWARNING: If mg/dL
does not appear with the
R symbol, call LifeScan
Customer Service at
1 800 227-8862.
Then the code number will
appear, followed by the
symbol and
meter and test strip codes match.
If they do not, code the meter
correctly. (See pages 10
R
mg/dL
. Be sure the
12.)
–
15