OneTouch Ultra Owner's Booklet page 40

NOTE: If you do not apply a blood sample within two minutes after the
symbol appears, the meter will turn itself off. You must remove the test
strip and insert it back into the meter to restart the test procedure.
Step 6
Accurate Results in Just 5 Seconds.
Your blood glucose test result will appear
after the meter counts down from 5 to 1.
Blood glucose test results are automatically
stored in the meter memory. You may also
record them in the logbook provided
with your system. Turn the meter off by
removing the test strip. Dispose of used
test strip in a sealed container.
m WARNING: If mg/dL does not appear with the test result, call
LifeScan Customer Service at 1 800 227-8862.
CAUTION: If you tested at the low end of the operating range
m
(43°F/ 6°C) and your glucose is high (over 180 mg/dL), the reading
on your meter may be lower than your actual glucose. In this situation,
repeat the test in a warmer environment with a new test strip as soon
as possible.
32
Example
Plasma-Calibrated Result