OneTouch Ultra Owner's Booklet page 59

Step 3
Place the Cover.
Place the cover over the battery
compartment. Push down until you hear
the tab click into place.
Step 4
Check the Time, Date, and Unit of Measure.
After replacing the battery, turn the meter on by inserting a test strip or
pressing the
time, time format and date are set correctly. If they are not, use the
and buttons to reset the meter before testing. See Meter Set-up,
pages 42–47. Also, be sure to confirm the unit of measure is mg/dL.
Step 5
Dispose of Batteries.
This product contains a lithium ion battery(ies), which contains
perchlorate material – special handling may apply, see
www.dtsc.ca.gov/hazardouswaste/perchlorate. As always, please
dispose of battery(ies) according to your local environmental
regulations. California Code of Regulations Title 22, Section 67384.4.
m WARNING: The mg/dL unit of measure is the standard in the
United States. If mg/dL does not appear, call LifeScan Customer
Service at 1 800 227-8862.
NOTE: Replacing the battery does not affect previous test results stored
in memory. However, the time and date settings may need to be updated.
Always confirm the unit of measure is mg/dL.
button. If the meter is in setting mode, confirm that the
51