OneTouch Ultra Owner's Booklet page 20

Step 3
Code the Meter.
Immediately press the
number is displayed on the meter to select the
correct code. Each time you press and release
the button, the number will increase by one.
To move more quickly, press and hold the
button.
NOTE: If the apply blood symbol is displayed
before the meter is coded correctly, remove the
test strip and repeat steps 1 through 3.
NOTE: If you scrolled past the desired code
number, continue to press the
the correct code number appears.
After selecting the correct code number, it will
flash for three seconds and then appear solid
for three seconds.
m CAUTION: Matching the code on the meter
and the code on the test strip vial is essential
to obtain accurate results. Each time you test,
check to make sure the code numbers match.
Then the symbol will appear with mg/dL,
indicating that the OneTouch
ready for testing.
m WARNING: If mg/dL does not appear
with the symbol, call LifeScan
Customer Service at 1 800 227-8862.
12
button, while the code
button until
Ultra System is
®
®
Example
Example