Napa Technology WineStation Home Manual page 27

e. After washing, the cap can be reattached to the head body. A small
amount of lubricant should be applied to the gasket of the cap to ensure
proper rotation. Only food grade lubricant should be used.
f. A fresh pick up tube can now be attached to the bottom of the head body.
g. The stainless steel spout should be cleaned once a week. Follow these steps:
i. Using a Phillips screw driver remove the 2 stainless steel screws.
ii. Carefully unscrew the stainless steel spout in a counter-clock wise direction.
iii. Using the cleaning brush, clean the spout and the threads using
soapy hot water.
iv. After drying, replace the stainless steel spout by inserting back
into the holder.
v. Reattach the 2 screws.
Napa Technology Customer Support 800.603.6550 Page 27