Dispensing Head Cleaning Instructions - Napa Technology WineStation Home Manual

2. Dispensing Head Cleaning Instructions:

It is recommended to clean the heads and pick up tubes with each bottle change.
To Clean the dispensing head follow the following steps:
a. Remove the pick up tube and discard.
b. Remove the cap from the head body by turning the cap counter-
clockwise. The cap will pop off.
c. Using the cleaning brush included with the accessories kit in the
WineStation, clean the spout and pouring tunnel using soapy hot water.
Also use the brush to clean the gaskets in the head body and the cap.
d. Both the cap and the head body should now be placed in a dish washer
and cleaned using a normal wash cycle.
Napa Technology Customer Support 800.603.6550 Page 26