Napa Technology WineStation Home Manual page 22

5. Your WineStation is now ready to pour wine.
a. Select "Dispense Mode"
b. Next, select one of the three dispensing buttons to pour the wine.
6. To set desired temperature, return to the "Service Mode" Menu and select "Config."
a. Next, select "Module Config" and then select "Adjust Temp" as show in
the two screens below:
7. Now set desired temperature by using the + and – buttons. Select exit when finished
to save settings.
• You may use Celsius or Fahrenheit.
Napa Technology Customer Support 800.603.6550 Page 22