[Integral Abs] Removing And Refitting Front Abs Sensor - BMW R 1150 R Maintenance Manual

1
[Integral ABS] Removing
34 52 044
and refitting front ABS sensor
•
Remove fuel tank ( 16.5).
a
•
Separate plug connector (1) in sensor line.
•
Remove the left brake caliper.
•
Remove the sensor (2).
•
Installation is the reverse of the removal proce-
dure.
e
Important:
Route the sensor cable correctly.
Check that the clips (3) are correctly seated.
X
Tightening torque:
Tighten the sensor ...................... hand-tight, 4 Nm
Brake caliper to fork slider............................ 30 Nm
3
2
R28340040
34.9