BMW R 1150 R Maintenance Manual page 30

Contents
Checking rear wheel bearing play by tilting wheel
(Inspection III)
Checking swinging arm bearings, adjusting if necessary
(Inspections I and III)
Greasing the side stand pivot
(Inspections I, II and III)
Checking function of side stand contact switch
(Inspections I, II, III and IV)
Checking/replacing spark plugs
(Inspection II) check/(Inspection III) replace
Tightening cylinder heads
(Inspection I)
Checking/adjusting valve clearances
(Inspections I, II and III)
Checking throttle cable freedom of movement, checking for chafes
and kinks, replacing if necessary, checking throttle cable play
Checking/adjusting idle speed and throttle valve synchronization
(Inspections I, II and III)
Final inspection with road safety and functional check
(Inspections I, II, III and IV)
Road safety check
Roadworthiness check
..............................................................................................55
........................................................................................55
.....................................................................................................56
.............................................................................56
..................................................55
...................................55
......................................................55
................57
.......................................59
Page
00.25