No Fuse (Unfused Toner, Smearing) - Lexmark T65 Series Product Study Manual

Lexmark T65x and X65x Mono Product Study Guide

No fuse (unfused toner, smearing)

CHECK THE FUSER UNIT ASSEMBLY INSTALLATION, REINSTALL AS NEEDED.
CHECK THE MEDIA CONDITION
Load new, dry, recommended media and re-print the defective image.
CHECK THE HEAT ROLL AND PRESSURE ROLL
Remove the fuser unit assembly.
Is there contamination or cracks on the heat roll and/or
pressure roll? If so, replace the fuser unit assembly.
CHECK THE LVPS CARD ASSEMBLY FOR PROPER CONNECTIONS
Reseat the connections properly.
If the component seems to be connected correctly, replace the LVPS card.
IF PROBLEM STILL PERSISTS; REPLACE THE SYSTEM CARD
For Training Purposes Only
CAUTION: : Allow the fuser unit
assembly to cool down.
45
Rev 1.47
6/3/2009