Skew - Lexmark T65 Series Product Study Manual

Lexmark T65x and X65x Mono Product Study Guide

Skew

CHECK PRINTER INSTALLATION PLACEMENT
Check for installation surface irregularities. Check for a damaged printer caster. Correct as needed.
PROPERLY LOAD MEDIA INTO THE TRAY ASSEMBLY AND ENSURE ALL GUIDES ARE SET
CORRECTLY.
CHECK FOR OBSTRUCTIONS IN THE AREA OF THE MEDIA FEED UNITS.
CHECK THE TRANSFER ROLL ASSEMBLY FOR EXCESS WEAR & CONTAMINATION.
CHECK THE ALIGNER ASSEMBLY FOR PROPER ADJUSTMENTS
IF PROBLEM STILL PERSISTS; REPLACE THE SYSTEM CARD
For Training Purposes Only
The printed
image is not
paralleled with
both sides of
the media
43
Rev 1.47
6/3/2009