Event History - insys icom GSM 4.3 Manual

INSYS GSM 4.3

12.28 Event History

The INSYS GSM 4.3 provides a history function to record events. This takes up to
200 entries chronologically as circular buffer (FIFO), i.e. the oldest messages are
overwritten in case of more than 200 entries.
Configuration with HSComm
In order to display the history, click on the "History" tab on the "History"
button.
Configuration with AT commands
In order to display the history, use the
command
After reading out the history, the entries are displayed chronologically starting with
the oldest entry (if the real-time clock has been set or reset before, entries with an
"earlier" date may be displayed later). If the list contains less than 200 entries, only
these are displayed.
The history contains the following information:
 Num
 Date/Time
 Reason
 Detail
 Dir
 Number
ble)
Table 12 on page 82 lists the recorded events and thus the possible entries in the
history.
Number of the entry in the history
Time stamp of the history
Event that has led to the entry
Specification of the event that has led to the entry
Direction of the event (if applicable)
IN = incoming call or SMS)
OUT = outgoing call or SMS)
Phone or alarm input number related to the event (if applica-
AT**HISTORY?
Functions
81