Table of Contents
Advertisement
INSYS GSM 4.3
Configuration with AT commands
In order to set the PIN, use the command
Replace <newPIN> with the PIN and with
the repetition of the PIN.
In order to change the PIN, use the com-
mand
Replace <oldPIN> with the current PIN,
and <newPIN> with the new PIN and with
the repetition of the PIN.
In order to delete the PIN, use the com-
mand
Replace <oldPIN> with the current PIN. If
you do not enter a new PIN, the DTMF PIN
will be disabled.
AT**PASST=<newPIN>,
<newPIN>
AT**PASST=<oldPIN>,
<newPIN>,<newPIN>
AT**PASST=<oldPIN>
Functions
69
Advertisement
Table of Contents
Need help?
Do you have a question about the GSM 4.3 and is the answer not in the manual?
Questions and answers