Retrieving orders from an EMR with Web Services
You can retrieve records from Pyramis (vers. 6.1 or later). You can also retrieve records
from EMRs (collectively referred to as EMR Systems) via the HeartCentrix data interface.
If the EMR System supports order entry, you can retrieve orders from this system.
Press Send/Receive.
1.
Select Get patient orders.
2.
Enter the appropriate criteria to limit the data that the EMR System returns.
3.
For all orders that are current for the institution, leave all fields blank.
•
For all orders for a given department, select the appropriate Department.
•
For a specific order and you know the order number, enter the Order #.
•
If you know the Patient's ID (MRN), enter the full ID#.
•
When you have finished entering your criteria, press Send/Receive.
4.
After a few seconds, the screen will display a list of all orders that meet your criteria.
Select the records that you want to download to this device:
5.
To select all records press Alt+1.
•
To deselect all records press Alt+2.
•
To select individual records, highlight a deselected record and press Select.
•
To deselect individual records, highlight a selected record and press Select.
•
Selected records display a checkmark.
Once you have made your selections, press Send/Receive.
6.
After a few seconds, the unit starts the download, informing you of the progress. If the
download does not complete successfully, refer to
for possible resolutions.
Burdick 8300/8500
Configure web services communication
Chapter 5, Network
Troubleshooting,
70-00900-02 C
3-7