External Serial Port Commands - Kensence S-MIX-PRO1600 Operation Manual

6.3-5 External serial port commands

The external serial port command is sent in the following format (black characters are fixed, "parameter"
in the red character indicates the string command to be sent, "param length" indicates the length of the
string command, and "packet length" equals "param length" plus 12 Convert to hex)
Synchroniz Packet
ation Length
Header （ 2BYTE
（ 2BYTE ） ）
0x55 0x55 n+12
The command uses hexadecimal calculations.
"abcd123", send it as follows:
Synchroniz Packet
ation Length
Header （ 2BYTE
15
Figure6.3.7 scene recall
Packet Method
Count （ 1BYT
（ 2BYTE ） E ）
0x00 0x00 0x02
Packet Method
Count （ 1BYT
（ 2BYTE ） E ）
Comman Paramete
d r Length
（ 2BYTE （ 2BYTE
） ）
0x07
n
0x01
If you want to send the string command
Comman Paramete
d r Length
（ 2BYTE （ 2BYTE
S-MIX-PRO1600
Parameter
CRC
s
(1BYTE)
（ n BYTE ）
String
command 0x00
to send
Parameters CRC
（ n BYTE ） (1BYTE)