Table of Contents
Advertisement
S-MIX-PRO1600
IP address change:
Click the white bar on the right side of "IPaddr1" to pop up the numeric keypad,
enter the new IP address, click "ENTER", and then click "Save" to save it, as shown in the following
figure:
6.3 PC control software operation instructions
The cloud media signal management platform is a green software. Double-click the main program to
open and use it, and control it through RS232 serial port cable or network cable connection matrix and
computer.
Note: When using a network connection, please set the IP of the computer to be in the same
network segment as the matrix IP, as shown below:
9
Advertisement
Table of Contents
