By using the Setup menu, you can make various
adjustments to items such as picture and sound. You
can also set a language for the subtitles and the
Setup menu, among other things. For details on
each Setup menu item, see pages 41 to 46.
To display and exit the Menu:
Press SETUP to display the menu. A second press
of SETUP will take you back to initial screen.
To go to the next level:
Press b on the remote control.
To go back to the previous level:
Press B on the remote control.
1. Press SETUP. The Setup menu appears.
2. Use V/v to select the desired option then press b
to move to the second level. The screen shows
the current setting for the selected item, as well
as alternate setting(s).
3. Use V/v to select the second desired option then
press b to move to the third level.
4. Use V/v to select the desired setting then press
ENTER to confirm your selection. Some items
require additional steps.
5. Press SETUP or PLAY to exit the Setup menu.
LANGUAGE SET UP
Select a language for the Setup menu and
Disc Audio / Subtitle / Menu
Select the language you prefer for the audio track
(disc audio), subtitles, and the disc menu.
Original: Refers to the original language in which
the disc was recorded.
Other: To select another language, press number
buttons then ENTER to enter the corresponding 4-digit
number according to the language code list in the
reference chapter. If you enter the wrong language
code, press CLEAR.
(See "Language Code List", page53.)