Download  Print this page

Setting Up The Player; Dvd Player Connections - Sony DVP-FX705 Operating Instructions Manual

Portable cd/dvd player.
Hide thumbs


Setting up the Player

The picture and sound of a nearby TV, VCR, or radio
may be distorted during playback. If this occurs,
position the player away from the TV, VCR, or radio,
or turn off the unit after removing the disc.

DVD Player Connections

Depending on your TV and other equipment, there
are various ways you can connect the player. Please
refer to the manuals of your TV, stereo system, or
other devices as necessary for additional connection
Video and Audio Connections to Your TV
Make sure the DVD player is connected directly to
the TV and not to a VCR, otherwise the DVD image
could be distorted by the copy protection system.
Video: Connect the VIDEO OUT jack on the DVD
player to the VIDEO INPUT jack on the TV using the
video cable.
S-Video: Connect the S-VIDEO OUT jack on the
DVD Player to the S-VIDEO INPUT jack on the TV
using the S-Video cable.
Audio Connection to Your TV:
Connect the AUDIO OUT jack of the DVD Player to
the AUDIO L and R INPUT jacks on the TV using the
audio cables. Do not connect the DVD Player's
AUDIO OUT jack to the PHONES jack (record deck)
of your audio system.
Rear of TV
Audio/ Video cable
Right side of unit
S-Video cable
(Not supplied)


Table of Contents

   Also See for Sony DVP-FX705

   Related Manuals for Sony DVP-FX705

Comments to this Manuals

Symbols: 0
Latest comments: