Table of Contents
Advertisement
7
Installation
USER NOTE
Except when fitting the front thermal insula-
tion pad, the combustion chamber must re-
main sealed by the burner door so that the
stainless steel combustion chamber is not
damaged by any welding or grinding work.
7.1
Thermal insulation and outer jacket panels
USER NOTE
When fitting the thermal insulation jacket,
make sure that the woven fabric is on the
outside and the cutouts are at the rear.
Slide the thermal insulation jacket underneath the boiler
RISK OF INJURY
due to burner door falling off when opened.
WARNING!
Make sure that both hinge bolts (Fig. 3,
Item 1) are inserted.
Wrap thermal insulation jackets overlapping around the
boiler and fix at the top with 5 spring clips
(Fig. 4, Item 1). Ensure that both door hinge bolts are
installed properly.
Open burner door.
Place lower thermal insulation pad (Fig. 4, Item 2)
against boiler body front panel and fix to the thermal in-
sulation jacket with 2 spring clips on each side.
Place thermal insulation strip (Fig. 4, Item 3) around
the cylindrical section of the boiler body at the top and
fix to the lower insulation pad with 2 spring clips, one
each side.
Place top thermal insulation pad against front of boiler
body (Fig. 4, Item 4).
USER NOTE
Take care to correctly position cutouts for
door hinges and threaded hinges of the
burner door.
Close burner door and secure in position with hex-
bolts.
Logano plus SB615 - Technical specifications are subject to change without prior notice.
1
Fig. 3
Sliding the thermal insulation jacket underneath the
boiler
Item 1: Hinge bolt
3
1
2
Fig. 4
Wrapping thermal insulation jacket around boiler and
fixing
Item 1: Insulating boiler jacket
Item 2: Lower thermal insulation pad
Item 3: Thermal insulation strip
Item 4: Top thermal insulation pad
Installation
7
7 747 015 037-04.2RS
4
11
Hide quick links:
Advertisement
Table of Contents
