Buderus Logano plus SB615 Installation And Servicing Instructions page 19

From underneath, locate the vertical tabs on the bottom
cross-member in the slots at the front of the side panel
flanges and fix the cross-member to the front of the boil-
er body with the 2 self-tapping screws.
Locate 4 vertical hooks (Fig. 21, Item 1) on lower front
panel in the slots in the side panel flanges.
Locate the rail on the front top panel and lower the top
edge of the top front panel down onto the rail (Fig. 21,
Item 2).
Position hooks (Fig. 21, Item 3) on top and bottom fas-
cia panels into the front panels.
Fix appliance insignia plate (Fig. 21, Item 4) to front
panel.
Logano plus SB615 - Technical specifications are subject to change without prior notice.
Fig. 20 Fixing the bottom cross-member
4
3
Fig. 21 Fixing upper and lower front panel sections
Item 1: Hook
Item 2: Top rail to support upper front panel
Item 3: Hooks on top and bottom fascia panels
Item 4: Appliance insignia plate
Installation 7
2
1
19