Table of Contents
Advertisement
2.8
VESA-Mount Installation
The display supports arm stands according to the VESA 100 mm (3.937 inches) stan-
dards.
Important:
–
Use an arm that is approved by VESA.
–
Use an arm that can support a weight of at least 10 kg (22.05 lbs).
To attach the panel unit to an arm stand:
–
Attach the arm stand firmly to the panel using the provided 4 x hexagonal
screws (M4 x 10 mm) and the dented washers. Use the provided 2.5 mm
(0.098 inches) Allen key to fix the screws.
2.9
Anti-Theft Kensington Lock
The Kensington Lock is a device used to physically fix a system in public place. Its
appearance and locking method may differ from the illustration depending on the
manufacturer. Refer to the manual provided with the Kensington Lock for proper use.
Please find a "
"
" icon.
To lock the product, follow the steps below:
1.
Wrap the Kensington lock cable around a large, stationary object such as desk
or chair.
2.
Slide the end of the cable with the lock attached through the looped end of the
Kensington lock cable.
3.
Insert the locking device into the Kensington slot on the product (1).
4.
Lock the lock.
These are general instructions. For exact instructions, see the User manual
supplied with the locking device.
The locking device has to be purchased separately.
The location of the Kensington Lock may be different depending on its model.
KT-E320_240FEE User Manual
" icon on the rear of the monitor. A kensington slot is above the
18
1
<Optional>
Advertisement
Table of Contents
