Changing The Backup Battery - Siemens SIMATIC IPC847E Operating Instructions Manual

Hide thumbs Also See for SIMATIC IPC847E:
Table of Contents

Advertisement

7.3.3

Changing the backup battery

Risk of explosion and release of harmful substances
Improper use and handling of lithium batteries can result in an explosion of the batteries.
Explosion of the lithium batteries and the resulting release of harmful substances can cause
severe physical injury. Damaged batteries jeopardize the function of the device.
• Replace spent batteries promptly. See information in "Maintenance intervals
• Replace the lithium battery only with an identical battery or types recommended by the
• Do not throw lithium batteries into fire, do not solder on the cell body, do not recharge,
Requirement
● An original spare part, i.e. a backup battery of the same type (article number of lithium
battery: A5E00331143)
● You have noted the firmware settings as the configuration data of the device is deleted
when the battery is replaced
You can find information on this in the detailed firmware/BIOS description, see "Important
instructions and manuals for operating the device (Page 11)".
● The device is open, see important information in "Open the device (Page 89)".
● You have observed the local regulations relating to the disposal of used batteries.
SIMATIC IPC847E
Operating Instructions, 10/2018, A5E43920357-AA
WARNING
(Page 129)".
manufacturer.
do not open, do not short-circuit, do not reverse polarity, do not heat above 100 °C and
protect from direct sunlight, moisture and condensation.
Device maintenance and repair
7.3 Removing and installing hardware
137

Advertisement

Table of Contents
loading

Table of Contents