Siemens SIMATIC IPC847E Operating Instructions Manual page 120

Expanding and assigning parameters to the device
6.6 Drives
4. Loosen the four screws
Figure 6-1
Figure 6-2
5. Install the new drive in the drive bay
6. Fasten the new drive with four screws
bay.
120
④
and remove the drive from the drive bay
Drive bay with HDD
Drive bay with SSD
⑤
. Ensure that the new drive faces upwards.
④
. Start at the hole marked with "1" on the drive
Operating Instructions, 10/2018, A5E43920357-AA
⑤
.
SIMATIC IPC847E