Ericsson BUSINESSPHONE 250 System Administrator Manual page 32

ALLOCATE FUNCTIONS TO PROGRAMMABLE KEYS
ALLOCATE A
FUNCTION TO A
PROGRAMMABLE
KEY
(continued)
Enter
FUNCTION
CHARACTERISTICS
Name selection
External line
30
Enter the associated number
See section "Function codes and required data".
Press (pre-programmed)
Press to finish programming
Specific details on some of the functions you can program on
the programmable keys.
Name selection is the basic function for all programmable
keys and it means that a call can be initiated by pressing one
single designated key.
Note: "Name selection" is also called "Dial-by-name".
Name selection is used to obtain the following functions:
• Extensions or facilities can be called via a directory number
• External call subscribers can be accessed via a common
abbreviated number
• Postdialling to initiate facilities that are activated via postdialling
With this function, an external line is represented by a
pre-programmed key on the telephone. For each external
line, a function key has to be programmed. Which means
that you are able to monitor the state of traffic for every pro-
grammed external line (e. g. free, busy). You can also estab-
lish an external call by pressing the external line key.
BusinessPhone 250 - System Administrator´s Guide
BusinessPhone 50 - System Administrator´s Guide