NAVIGATION AND EDITING DURING PROGRAMMING
COPY FUNCTION
copy
15 Sep 10:36
COPY:
Enter
Enter
15 Sep 10:36
COPY:0101
Enter
(continued)
BusinessPhone 250 - System Administrator´s Guide
BusinessPhone 50 - System Administrator´s Guide
An entered value for an extension or trunk can be copied to an
optional number of other extensions or trunks. This is useful
when, for example, several extensions should have the same
categories or key functions. In programming mode:
Press to access the copy function (see display)
The display shows:
+15°
,
-
Enter the command to be copied
Note: It is possible to copy all commands of a command group,
see "Several command groups and records".
Press (pre-programmed)
Enter directory number
The extension or trunk that is to serve as reference for copying.
Press (pre-programmed)
The display shows (example):
+15°
200
,
-
If the command is of a type that also requires a record
number to be stated, for example when programming keys
on telephones, this shall also be stated when copying.
Enter record number and press (pre-programmed)
pf_3
return
TO
:
pf_3
return
11