Using The Spot Light - Metering Function; Adjusting The Exposure (Exposure) - Sony MVC-FD95 Operating Instructions (primary manual) Operating Instructions Manual

Using the Spot light
metering function
–
Select this mode when there is
backlight or when there is strong
contrast between the subject and the
background, etc.
Press SPOT METER to activate the
spot light-metering function. Position
the point you want to record at the spot
light-metering cross hair.
LCD screen/finder
Spot light-metering
cross hair
Adjusting the
exposure
(EXPOSURE)
SPOT
METER
1
Set the PLAY/STILL/MOVIE
selector to MOVIE or STILL.
2
Select [CAMERA] and then
[EXPOSURE] from the menu.
3
Select the desired exposure
value.
Adjust the exposure value while
checking the brightness of the
background. You can select values
ranging from +2.0 EV to -2.0 EV
in steps of 1/3 EV.
Note
If a subject is under extremely bright or
dark situations, or the flash is used, the
exposure adjustment may not be
effective.
1
2, 3
41