Recording The Date And Time On The Still Image; (Date/Time); Using The Spot Light-Metering Function; B Various Playback - Sony MVC-CD200 Service Manual

Recording the date
and time on the still
image (DATE/TIME)
Mode dial: /S/A/M/SCN
5
1, 4
2, 3
1
Set the mode dial to SET UP.
The setup screen appears.
2
Select [ ] (CAMERA) with
v / V , [DATE/TIME] with B / v / V ,
then press B .
3
Select the date and time
setting with v / V , then press
z .
DAY & TIME
Imposes the date, hour, and
minute.
DATE
Imposes the year, month, and day.
OFF
Does not impose the date and time.
4
Set the mode dial to , S, A,
M, or SCN.
5
Record the image.
The date and time do not appear on
the LCD screen during shooting.
These appear during playback
only.
2001 7 4
70

B Various playback

Playing back three or
nine images at once
Mode dial:
You can display multiple images on the
LCD screen at one time using the
zoom buttons.
1
2
1
Set the mode dial to .
2
Press the zoom W/T buttons
repeatedly.
The LCD screen display changes
as follows:
• Single (single-image) screen
1600 1600 1600
1/10
100-0001 2001 7 4 10:30
PM
FILE BACK/NEXT VOLUME
W T
• Index (nine-image) screen
SINGLE DISPLAY
W T
72
Notes
• If you select [DATE] in step 3, the date is
imposed onto the image in the order
selected with "Setting the date and time"
(page 14).
• The date and time are not superimposed
onto Clip Motion images.
• Triple-image screen
APERTURE VALUE: F2.5
SHUTTER SPEED: 1/125
EXPOSURE VALUE: 0.0
100-0005 2001 7 4 10:30
PM
SINGLE DISPLAY
The image indicated by the yellow
frame in the index screen is
displayed in the middle of the
triple-image screen with the
recording information. To display
v V
the other information, press / .
The following marks are displayed
on each image according to the
image type and settings.
: Moving image file
: VOICE mode file
: E-mail file
: Print mark
-
: Protect mark
TEXT: TEXT file
TIFF: TIFF file
CLIP: Clip Motion file
(No mark): Normal recording (no
settings)
To display the next
(previous) index screen
v V b B
Press / / / .
To return to normal playback
(single-image)
• Press the zoom T button repeatedly.
• Press z
.
Note
When viewing an image recorded in Clip
Motion or TEXT mode on the index screen,
the image may appear different from the
actual image.
Using the Spot light-
metering function
Mode dial: /S/A/M/SCN/
Use this function when there is
backlight or when there is strong
contrast between the subject and the
background, etc.
Press to activate the spot light-
metering function. Position the point
you want to record at the spot light-
metering cross hair.
LCD screen
Spot light-
metering
cross hair
Tip
When the triple-image screen is
displayed, pressing MENU opens the
menu including [PRINT], [PROTECT],
and [DELETE]. For details on items, see
pages 77, 78, and 81. To close the menu,
press MENU again. The menu disappears
and the recording information is
indicated.
1-17
71
Enlarging a part of the
still image (Zoom and
trimming)
Mode dial:
1
3
4
1
Set the mode dial to .
2
Display the image to be
enlarged.
3
Zoom in the image with the
zoom T button.
4
Press v / V / b / B repeatedly to
select the desired portion of
the image.
v
: The image moves downward
V
: The image moves upward
b
: The image moves rightward
B
: The image moves leftward
To return to the normal size
z
Press .
To record an enlarged image
(trimming)
1
Press MENU after zooming.
2
B
Select [TRIMMING] with , then
z
press .
3
v V
Select the image size with / ,
z
then press .
The image is recorded and the
image on the LCD screen returns
to the normal size after recording.
73