Adjusting The White Balance (White Balance) - Sony MVC-FD95 Operating Instructions (primary manual) Operating Instructions Manual

Adjusting the white
balance (WHITE
BALANCE)
Normally the white balance is
automatically adjusted.
1
Set the PLAY/STILL/MOVIE
selector to MOVIE or STILL.
2
Press WHITE BALANCE
repeatedly to select the
desired white balance
setting.
IN DOOR (n)
• Places where the lighting
condition changes quickly
• Under bright lighting such as
photography studios
• Under sodium or mercury lamps
OUT DOOR (
Recording a sunrise/sunset, night
scene, neon signs, or fireworks
One-push white balance (
Adjusting the white balance
depending on the light source
AUTO (No indicator)
Adjusts the white balance
automatically
To shoot in one-push white
balance mode
1 Press WHITE BALANCE
repeatedly until the
appears.
42
1
2
)
)
indicator
2 Shoot a white object such as paper
full under the same situation you will
shoot.
3 Press .
The indicator flashes quickly.
When the white balance has been
adjusted and stored in the memory, the
indicator stops flashing.
To reactivate auto
adjustment
Select [AUTO] in step 2.
Notes
• Select [AUTO] when shooting with
fluorescent lighting.
• The
indicator means:
Slow flashing: white balance is not set.
Quick flashing: white balance is being
adjusted (after you pressed
Lit steady: white balance has been set.
• If the indicator keeps flashing even
when you press
white balance mode.
).
, record in automatic