Basic operations
Recording still images
Still images are recorded in JPEG format.
To record still images, slide the POWER switch to the right to turn on the power and
insert a floppy disk.
1
1
Set the PLAY/STILL/MOVIE selector to STILL.
2
Press and hold the shutter button
halfway down and check the image.
While the AE lock indicator
flashing, the image is frozen, however, the
image is not yet recorded. When the camera
finishes the automatic adjustments*, the AE
lock indicator
ready for recording.
To cancel the recording, release the shutter
button.
3
Press the shutter button fully down.
The shutter clicks and the image is recorded on the floppy disk.
The exposure and focus are automatically adjusted. The focus is not automatically adjusted
when the camera is in manual focus mode.
For the number of images you can record on a floppy disk
See page 36.
ACCESS lamp
z
(green) is
z
lights up and the camera is
2, 3
AE lock indicator
B Recording
15
Need help?
Do you have a question about the MVC-FD95 Operating Instructions (primary manual) and is the answer not in the manual?
Questions and answers