Sony MVC-FD95 Operating Instructions (primary manual) Operating Instructions Manual page 34

CAMERA
Item Setting
x ON
DIGITAL
ZOOM
OFF
SHARPNESS +2 to –2
FLASH HIGH
LEVEL
x NORMAL Normal setting.
LOW
EXPOSURE +2.0EV to
–2.0EV
TOOL
Item Setting
COPY OK
x CANCEL
RESIZE 1600×1200
(Only in 1024×768
PLAY
640×480
x CANCEL
(single)
mode)
SETUP
Item Setting
x STBY/ON
DEMO
OFF
x NTSC
VIDEO
OUT
PAL
34
Description
Uses digital zoom.
Does not use digital zoom.
Adjusts the sharpness of the image.
The indicator appears (except when
the setting is 0).
Makes the flash level higher than
normal.
Makes the flash level lower than normal.
Adjusts the exposure.
Description
Copies the images (page 50).
Cancels copying of the image.
Changes the recorded image size
(page 50).
Description
Displayed only when you use the AC
power adaptor in MOVIE or STILL
mode. When [ON] is selected, a
demonstration will start if you do not
operate your camera for about 10
minutes. To stop the demonstration, turn
off your camera.
Sets the video output signal to NTSC
mode (e.g., Japan, the USA).
Sets the video output signal to PAL
mode (e.g., Europe).
PLAY/STILL/
MOVIE selector
STILL
STILL
STILL
MOVIE
STILL
PLAY/STILL/
MOVIE selector
PLAY
PLAY
PLAY/STILL/
MOVIE selector
MOVIE
STILL
MOVIE
STILL
PLAY