Kingfisher KI6503 series User Manual page 24

KI6503 48-Channel Optical CWDM Power Meter
6.10.9 PM Scan Mode option
This option provides an alternative method (to that in section 6.3) of
programming PM Modes (see section 6.4) to operate in Auto or Manual
condition. See picture below for the user interface.
Use [▲, ▼] to toggle between Auto and Manual. Press [ENTER] to save
setting or press [ESC] to return to option list of Menu without saving.
Programmable to
Auto or Manual
6.10.10 Threshold option
Use this option to program the threshold level which is visible when the
measured data is presented on graphical format.
Use the numerical keys to enter a new valid threshold value (-40dBm ~ +10
dBm) and use [▲, ▼] for "+" or "-" sign selection. Press [ENTER] to save the
new threshold setting.
See pictures below for examples.
User Manual KI6503 48-Channel Optical DWDM Power Meter Revision 1
Page 24 of 28