Kingfisher KI23400 Series Quick Reference Manual

Kingfisher KI23400 Series Quick Reference Manual

2-way loss test meter
Hide thumbs Also See for KI23400 Series:

Advertisement

Quick Links

QUICK REFERENCE GUIDE
KI23400/KI27400 Series 2-Way Loss Test Meter
Revision 2
Date: 11 Sep 2020
Page 1 of 7

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the KI23400 Series and is the answer not in the manual?

Questions and answers

Summary of Contents for Kingfisher KI23400 Series

  • Page 1 QUICK REFERENCE GUIDE KI23400/KI27400 Series 2-Way Loss Test Meter Revision 2 Date: 11 Sep 2020 Page 1 of 7...
  • Page 2 Quick Reference Guide: KI23400/KI27400 2-way Loss Test Meter General Operation: • To return to Home menu, press F1. • To remove interchangeable connector adaptor, press button Meter Menu: on front of case and pull off adaptor. This may be easier with •...
  • Page 3 Quick Reference Guide: KI23400/KI27400 2-way Loss Test Meter • When display shows absolute power (dBm), loss (dB), To select modulation while source is on, press and release reference power (dBm), hold down Toggle Centre to show F3. Repeatedly press this button to scroll & select a tone sources’...
  • Page 4 Quick Reference Guide: KI23400/KI27400 2-way Loss Test Meter • using the + or -, hold button above “MEMORY” then press For far-end unit to respond to near-end unit: Press F4 on far- F2 for three seconds, or until it stops beeping. end unit.
  • Page 5 Quick Reference Guide: KI23400/KI27400 2-way Loss Test Meter • “MEMORY” and press F2 for three seconds or until it stops [For data saved in Meter mode only]: To toggle display to beeping. show absolute power in dBm or in both dBm & watt, press •...
  • Page 6 Quick Reference Guide: KI23400/KI27400 2-way Loss Test Meter An overall test result, “FAIL” will be shown at the top • Use F4 to toggle WC (worst case) / AV (average) pass/fail right corner of LCD if, loss test status of any wavelength method.
  • Page 7 Quick Reference Guide: KI23400/KI27400 2-way Loss Test Meter To turn Slow Mode off (i.e. to resume Tone detection), press To delete a Text ID Tag F3 to go to Meter menu, hold F3 then press F4. • Enter Meter or AUTO menu. •...

This manual is also suitable for:

Ki27400 series

Table of Contents