Graphical Display Mode; Saving Scanned Data In Instrument's Memory - Kingfisher KI6503 series User Manual

KI6503 48-Channel Optical CWDM Power Meter

6.7 Graphical Display Mode

Press [Graph] to display the wavelengths/power values scanned at the
optical input in graphical format, see picture below for an example.
Press [Graph] again will switch the display back to multiple-wavelength
format shown in example of section 6.5.

6.8 Saving Scanned Data in Instrument's Memory

In SCAN Mode, press [Save] to save test data in the instrument's internal
memory, see below user interface. Press [ENTER] to continue with data
saving or press [ESC] to quit without saving.
A maximum of 300 records of 48- test can be saved in the instrument's
memory.
User Manual KI6503 48-Channel Optical DWDM Power Meter Revision 1
Page 14 of 28