Preventing Accidental Erasure (Protect); Changing The Recorded Still Image Size (Resize); Selecting Still Images To Print (Print) - Sony MVC-CD200 Service Manual

5
When you select [ALL]
b B
Select [ENTER] with / , then
z
press .
All the unprotected images are
deleted.
When you select [SELECT]
The frame of the selected image
turns green.
1
Select the image to be deleted
v V b B z
with / / / , then press .
z
To cancel, press again.
Repeat this step to select other
images.
The (delete) indicator
appears on the selected images.
SET MENU TO NEXT
2
Press MENU.
3
b B
Select [OK] with / , then
z
press .
To cancel deleting
b B in step 4
Select [CANCEL] with /
b B in step 5, then
or [EXIT] with /
z
press .
Notes
• When using a CD-R, even if you delete
images, the disc remaining space does not
increase.
• Only when using a CD-RW, the disc
remaining space increases after deleting
the last-recorded image if the is
indicated on the LCD screen before
deleting. If you modify an image, or open
and close the disc cover, will
disappear.
• If the disc space is not sufficient, you may
not be able to delete an image.
• If the lower four-digit file number of an
image is the same as the number of the
selected image, that image also will be
deleted.
78
Changing the
recorded still image
size (RESIZE)
Mode dial:
You can change the image size of the
recorded image.
1
3, 4
2
1
Set the mode dial to , then
display the image of which
you want to change the size.
2
Press MENU.
The menu appears.
3 b B
Select [RESIZE] with / ,
z
then press .
4
Select the desired size with
v / V , then press z .
MVC-CD200: 1600×1200,
1024×768, 640×480
MVC-CD300: 2048×1536,
1600×1200, 1280×960, 640×480
The resized image is recorded.
To cancel changing the size
v V
Select [CANCEL] with / in step 4,
z
then press .
80
Preventing accidental
erasure (PROTECT)
Mode dial:
Protects images against accidental
erasure.
In single-image or triple-
image mode
1
2
2, 4
3
1
Set the mode dial to .
2
In single-image mode
Display the image you want to
b B
protect with / .
In triple-image mode
Press the zoom W button twice to
turn to the triple-image mode.
Display the image you want to
b B
protect with / .
3
Press MENU.
The menu appears.
4 b B
Select [PROTECT] with / in
single-image mode, or with
v V
/ in triple-image mode,
then press z .
The displayed image (or the
middle-positioned image in triple-
-
image mode) is protected. The
(protect) indicator appears on the
image.
To release protection
-
z
again in step 4. The
Press
indicator disappears.
Notes
• When you change from a small size to a
large size, the picture quality deteriorates.
• The original image is retained even after
resizing.
• You cannot change the size of images
recorded in TEXT mode, moving images,
uncompressed images, or Clip Motion
images.
• The resized image is recorded as the
newest file.
• If you resize an image, the disc space will
decrease.
• If the disc space is not sufficient, you may
not be able to resize an image.
1-19
In index mode
1
3 – 5
2, 5
1
Set the mode dial to , then
display the index screen with
the zoom W button.
2
Press MENU.
The menu appears.
3 Select [PROTECT] with b / B ,
then press z .
4 Select [ALL] or [SELECT]
with b / B , then press z .
Selecting still images
to print (PRINT)
Mode dial:
You can mark a print mark on still
images recorded with your camera.
This mark is convenient when you
have images printed at a shop that
conforms with the DPOF (Digital Print
Order Format) standard.
In single-image or triple-
image mode
1
2
2, 4
3
1
Set the mode dial to .
2
In single-image mode
Display the image you want to
b B
print with / .
In triple-image mode
Press the zoom W button twice to
turn to the triple-image mode.
Display the image you want to
b B
print with / .
3
Press MENU.
The menu appears.
4 b B
Select [PRINT] with / in
single-image mode, or with
v V
/ in triple-image mode,
then press z .
The (print) mark is marked on
the displayed image (or the
middle-positioned image in triple-
image mode).
5
When you select [ALL]
b B
Select [ON] with / , then press
z
.
All the images in the disc are
protected.
When you select [SELECT]
The frame of the selected image
turns green.
1
Select the image to be protected
v V b B z
with / / / , then press .
z
To cancel, press again.
Repeat this step to select other
images.
-
The indicator appears on
the selected images.
SET MENU TO NEXT
2
Press MENU.
3
b B
Select [OK] with / , then
z
press .
To release protection
If you selected [ALL] in step 4, select
b B z
[OFF] with / , then press . If you
selected [SELECT] in step 4, select the
v V b
image to be unprotected with / / /
B z
, then press . Repeat this step to
select other images. Press MENU and
b B z
select [OK] with / , then press .
Notes
• If you protect an image, the disc space will
decrease. Also, if you release protection,
the disc space will decrease.
• If the disc space is not sufficient, you may
not be able to protect an image.
79
To unmark the print mark
z again in step 4.
Press mark
disappear.
In index mode
1
3 – 5, 7
2, 6
1
Set the mode dial to , then
display the index screen with
the zoom W button.
2
Press MENU.
The menu appears.
3 b B
Select [PRINT] with / , then
z
press .
4 b B
Select [SELECT] with / ,
then press z .
When marking the mark, you
cannot select [ALL].
The frame of the selected image
turns green.
5
Select the image to be
marked with v / V / b / B , then
press z .
z
To cancel, press again.
Repeat this step to select other
images. The mark appears on
the selected image.
SET MENU TO NEXT
81