Rotating Still Images - Rotate - Sony Cyber-Shot DSC-P9 Operating Instructions Manual

filename[D:\Documents and Settings\YAMANE\My Documents\WORKS\DSCP92\3082719111\3082719111DSCP92UC\02GB-
DSCP92UC\10adv.fm]
01cov.book Page 60 Tuesday, February 18, 2003 3:07 PM
To skip to the next/previous
image during slide show
Press B (next), or b (previous).
• The interval settings are just guidelines. The
actual intervals differ, based on factors like the
size of the image.
60
Rotating still images
– Rotate
Mode selector:
Images shot when holding the camera
vertically can be rotated and displayed
horizontally.
Control button
MENU
Mode selector
masterpage:Left
a Set the mode selector to
and display the image you
want to rotate.
b Press MENU.
The menu appears.
c Select [Rotate] with b/B, then
press z.
d Select
with v , and rotate
the image with b/B.
e Select [OK] with v/V, then
press z.
To cancel the rotation
In Step 4 or 5, select [Cancel].
• Protected images, movies (MPEG movie), or
images recorded in Clip Motion/Multi Burst
modes cannot be rotated.
• You may not be able to rotate images shot with
other cameras.
• Also, when viewing images on a computer, the
image rotation information may not be
reflected depending on the application
software.
model name1[DSC-P92]
[3-082-719-11(1)]
,