Midland SP-8 Operation, Parts And Service Manual page 87

NO. REQ
1 1 COLUMN (FIXED)
2 1 COLUMN (MOVEABLE)
3 1 CYL RING
4 1 KEY (AT CYL RING)
5 1 BLADE PIVOT, CURVED BLADE ASS'Y.
6 1 BLADE SECTION (1 FT)
7 2 BLADE SECTION (2 FT)
8 1 EDGER (INNER)
9 1 EDGER MOUNT (EDGER-IN)
10 1 HINGE PIN (EDGER-IN)
11 2 GUIDE (EDGER-IN) (5-1/2 x 11)
12 1 MTG BRACKET (SLOPE TUBE)- L/H
13 1 SLOPE TUBE (OUT)
14 1 SLOPE TUBE (MID)
15 1 SLOPE TUBE (IN)
16 1 OUTER EDGER ASSEMBLY, SP-8/-10 BLADE
17 1 SLEEVE (BLADE PIVOT)
18 1 MTG BRACKET (PUSH TUBE)
19 2 CYLINDER, HYD., TIE ROD, 2-1/2" x 18"
20 2 PIN, HITCH W/ LYNCH PIN 3/4 x 4-3/4
21 6 LUBE FITTING, STRAIGHT (SERRATED)
22 2 HEX HD CAP SCREW 5/16-18 UNC x 5/8
23 8 HEX HD CAP SCREW 5/16-18 UNC x 7/8
24 10 LOCK WASHER, 5/16
25 4 HEX HD CAP SCREW 1/2-13 UNC x 1-1/2
26 11 HEX HD CAP SCREW 1/2-13 UNC x 1-3/4
27 4 HEX HD CAP SCREW 1/2-13 UNC x 2-1/4
28 2 HEX HD CAP SCREW 1/2-13 UNC x 2-1/2
29 1 SOCKET HD CAP SCREW 1/2-13 UNC x 1-3/4
30 24 HEX NUT, 1/2-13 UNC
31 24 LOCK WASHER, 1/2
32 5 HEX HD CAP SCREW 5/8-11 UNC x 5-1/2
33 5 HEX NUT, 5/8-11 UNC
34 5 LOCK WASHER, 5/8
35 1 HEX HD CAP SCREW 1-8 UNC x 6-1/2
36 1 HEX NUT, 1-8 UNC
37 1 LOCK WASHER, 1
38 1 MTG BRACKET (EDGER-OUT)
39 1 HINGE PIN (EDGER-OUT)
40 8 HAIRPIN, COTTER, ZINC PLATED
41 1 BALL HITCH, 2 DIA, ZINC-PLATED
Note:
1. Left side blade and column assembly is available in dual sided configuration only.
2. When setting up left side blade and column assembly for paving, dismount following components from right side blade
assembly (See Section 4.2.1 for components)
Push Tube Assembly (View A-A in Section 4.2.1), Item 53, 54 and 55.
Assemble these components on left side as the mirror image of right side.
www.roadwidener.com
DESCRIPTION
Model SP-8 & 10
PART NUMBER
SP-421
SP-426
SP-431
SP-434
SP-435
SP-441
SP-444
SP-447
SP-451
SP-453
SP-455
SP-591
SP-460
SP-462
SP-464
SP-590
SP-497
SP-498
M1013
M11006
1743-8
HCS-5/16-18-0.63
HCS-5/16-18-0.88
LKW-5/16
HCS-1/2-13-1.50
HCS-1/2-13-1.75
HCS-1/2-13-2.25
HCS-1/2-13-2.50
KCS-1/2-13-1.75
HXN-1/2-13
LKW-1/2
HCS-5/8-11-5.50
HXN-5/8-11
LKW-5/8
HCS-1-8-6.50
HXN-1-8
LKW-1
SP-483
SP-486
M11013
M11005
81