Midland SP-8 Operation, Parts And Service Manual page 43

No Description
1 Lubricate Take Up Bearings
2 Lubricate Column
3 Check Hydraulic Oil Level
4 Check Belt Scraper & Sideboard Rubbers
5 Check Engine Oil Level
6 Check Engine Coolant Level
7 Check Oil Level On Rear Axle Hub
8 Check Hydraulic Oil Filter Gage
9 Lubricate Rear Brake Mechanism
10 Lubricate Conveyor Chain
11 Check Oil Level On Drive Axle
12 Check Oil Level On Differential
13 Lubricate Fittings On Axles and Differential
14 Check Oil Level On Transmission
15 Lubricate Hydraulic Blade Extension Guides
16 Lubricate Blade Hinges
17 Lubricate Push Tubes Extension & Ball Joints
18 Change Hydraulic Oil Filters
19 Change Transmission Filter
20 Change Fuel/Water Separator Element
21 Change Oil On Drive Axle and Differential
22 Change Hydraulic Oil
23 Change Transmission Oil
24 Change Axle Planetary Oil
25 Lubricate Push Rollers
Item number corresponds to number on drawing to
indicate location on machine.
Hours mentioned are machine hours
See OEM engine, axle and transmission manuals for
detailed service information.
^
Prevent serious injury or death.
Before performing inspections, service or
maintenance:
Park machine on firm, level surface and
•
engage parking brake.
Switch engine off.
•
Close and lock control panel cover.
•
Chock tires.
•
www.roadwidener.com
WARNING
Daily 7 50 100
days hrs Hrs
•
•
•
•
•
•
•
•
•
•
Pressurized fluids can penetrate the skin.
Hydraulic hoses can fail from age, damage
and exposure.
Use body and face protection while
searching for leaks. A tiny, almost invisible
leak can penetrate the skin, thereby
requiring immediate medical attention.
Use wood or cardboard to detect hydraulic
leaks, never use your hands.
Model SP-8 & 10
Interval
30 200 250 700 Ann-
days Hrs Hrs Hrs ually
•
•
•
•
•
•
•
•
•
•
•
^
WARNING
1000 As
Hrs Req.
•
•
•
•
37