Midland SP-8 Operation, Parts And Service Manual page 36

Model SP-8 &10
Remove pins (C) to release push tube (D) from
7.
mounting bracket.
Remove cotter pins (E) to disengage outer edger
8.
brace (F) from turnbuckle mounts.
Swing in outer edger assembly (G) until it is parallel
9.
to length of blade.
Insert the locking hardware (H) in the turnbuckle
10.
mount to hold the outer edger assembly in place.
30
Start engine as in section 5.2.
11.
Toggle grade switch on operator console to lift blade
12.
assembly to maximum stroke of grade cylinder.
Swing blade assembly inward until its length is
13.
parallel to machine body.
Engage blade restraint assembly (J) with blade
14.
assembly by inserting bracket (K) into lower edge
(L) of blade curved profile.
www.roadwidener.com