Unicum Foodbox Series User Manual page 6

ТМ
could be used.
• When connecting the vending machine to the power network the use of
adapters, extenders and multi-pin plugs are prohibited.
• Switching on several vending machines by using one switch at the central
electric panel is prohibited. This may damage the vending machines.
• Connecting the vending machine to the power network without grounding
is prohibited.
• Any vending machine changes or modifications without manufacturer's
notification are prohibited! Otherwise, the manufacturer assumes no war-
ranty liabilities.
• The lock programming operations should be executed with the vending
machine door open! Otherwise, the door will be locked by a latch.
• To return the lock to the programming position only use the master key,
used for the latest programming!
• To prevent the vending machine from overturning it's prohibited to open
the vending machine doors and pulling out the shelves until the vending
machine is securely fixed on the mounting surface!
• To prevent the vending machine overturning pull out one shelf at a time,
goods should be laid in such a way, that the space for falling into the
product dispensing tray is free from protruding parts of other products or
shelves! The shelves should be pushed all the way back!
• CAUtIoN: In order to avoid a hazard due to inadvertent resetting of the
thermal cut-out, this appliance must not be supplied through an external
switching device, such as a timer, or connected to a circuit that is regularly
switched on and off by the utility.
• To avoid vending machine overturning don't pull out all shelves simultane-
ously!
• The use of abrasive materials, solvents, bleaching or chlorine-containing
materials is prohibited!
Version 1.0 / 11-2018 6