Lock - Unicum Foodbox Series User Manual

ТМ

4.4.5 lock

The vending machine is supplied with the RIELDA lock, which can be pro-
grammed for the required key set that permits using one work key for several
RIELDA locks at once, as well as easily change any lock combination for the
new work key in case of old key loss, theft or breakage.
Closed
90
0
The lock is supplied together with three keys (fig. 4.6):
- One master key - a GOLDISH key used only for lock programming;
- Two work keys - SILVERY keys used for the vending machine door open-
ing/closing.
The lock may be in two positions:
- Working position ("locked" position - fig. 4.6);
- Programming position ("open" position - fig. 4.6).
The vending machine is supplied with a ready-programmed lock. To open/
close the vending machine door insert the SILVERY work key (sfig. 4.6) and
turn it in the lock by 90° in the required position (fig. 4.6).
AttENtIoN!
the lock programming operations should be executed with the
vending machine door open! otherwise, the door will be locked
by a latch.
to return the lock to the programming position only use the
master key, used for the latest programming!
Version 1.0 / 11-2018
Master key
Open/programming
Reference notch
figure 4.6
Work keys
25