Installation; Transport And Positioning; Installation Environment Features - Unicum Foodbox Series User Manual

ТМ

5.0 INStAllAtIoN

5.1 transport and positioning

to transport and handle the vending machine, care-
fully follow the instructions below:
• Use a pallet/lift truck with minimum carrying capacity of 400 kg.
• Should the machine not be installed immediately, store the vending ma-
chine vertically and in a dry and protected room.
• CAUtIoN: it is strictly forbidden to transport and/or position the vending
machine horizontally.
• In the event the machine is mistakenly laid horizontally, place in the up-
right position and wait at least 12 hours before switching on; otherwise,
damage may be caused to the cooling system.
• Position the vending machine in the installation area, work carefully and
avoid maneuvers that may cause damage to the machine.
• Remove all packaging from the vending machine, and carefully move it to
its final position
• The vending machine should be transported in a vertical position on its
own base.
• It's forbidden to drop and overturn the vending machine.
• It's forbidden to use ropes, strands, cables, etc. for the vending machine
movement.
• Before moving the vending machine make sure that the power cord is
disconnected from the mains.
• After transportation of the vending machine for long distances at which
it was exposed to high level of vibration or impacts, check the contact
connections between the elements and functional nodes, as well as the
mounting of the elements and functional nodes.

5.2 Installation environment features

CAUtIoN: Do Not USE JEtS of WAtER to ClEAN tHE VENDING MACHINE. It IS
Not SUItAblE foR INStAllAtIoN IN ENVIRoNMENtS WHERE WAtER JEtS ARE
USED
Version 1.0 / 11-2018 27