Unicum Foodbox Series User Manual page 26

ТМ
To program the lock for another work key (e.g. for using one work key for
several vending machines or in the case of the work key loss) it's necessary
to execute the following operations with the vending machine door OPEN:
- Insert the master key («close» position - fig. 4.6), by which the lock was
the last time programmed or the one that was supplied with the lock (for initial
programming), into the lock. Secure the master key in the lock for at least 1
second. Then turn the key by 90
4.6).
- While holding shutting off device of the door in order to avoid a sponta-
neous turn of the lock, remove the master key from the lock and insert them
into the new master key , which you want to program the lock. If you want to
program the lock on the same master key, don't remove the master key from
the lock.
- Then turn the master key by 90° to the opposite direction («closed» posi-
tion - fig. 4.6).
- Take out the master key from the lock and put it in a safe place. To open/
close the lock use the work keys supplied with your new master key.
Version 1.0 / 11-2018
in the direction of the reference notch (fig.
0
26