Leveling; Stability - Unicum Foodbox Series User Manual

ТМ
• After the vending machine installation and levelling take the ventilation
cover, packed for the duration of transportation into the product dispens-
ing tray, and install it on the vending machine by using the screws from
the fitting kit (fig. 5.1).
figure 5.1- Installation of ventilation cover
AttENtIoN!
to prevent the vending machine from overturning it's prohibited
to open the vending machine doors and pulling out the shelves
until the vending machine is securely fixed on the mounting sur-
face!

5.4 leveling

For correct operation the vending machine must be sited on a level surface.
Any irregularities in the floor can be compensated by adjusting the screw-on
feet on the vending machine in order to get it perfectly level and to guarantee

stability.

Note: the vending machine will operate correctly when positioned on
a horizontal surface.
5.5 Stability
The stability of vending machines against overturning is guaranteed wheth-
er the vending machine is empty or full and / or with the door open.
the overturning of the vending machine without external influence is
impossible.
Version 1.0 / 11-2018 29