Unicum Foodbox Series User Manual page 30

ТМ
However, to protect the machine against vandalism, such as attempts to tilt
the vending machine, we recommend to attach one of the following optional
kits:
figure 5.2 - Vending machine wall mounting
To mount the vending machine to the wall:
• Take the rests and self-tapping screw packed for the duration of transpor-
tation into the product dispensing tray.
• Fix the rests to the vending machine by using four screws.
• Move the vending machine close to the wall.
• Mark the location of mounting holes by a marker.
• Move the vending machine away from the wall and drill 2 blind holes for
the screw plugs installation.
• Install the screw plugs and move the vending machine to the wall, so that
the fixing holes in the wall match with the holes in the rests. Then fix the
vending machine by using self-tapping screws.
Note: When fixing the vending machine to the wall, at the first place fix the
wall mount rests to the vending machine, and only then proceed fixing the
vending machine to the wall!
LLC ''KRAFT'' does not assume responsibility for any damage caused
by the lack of consulting this instructions. All the operations must be
done by authorized personnel
Version 1.0 / 11-2018
1 - Self-tapping screw
2 - Screw plug
30