Fisher Scientific Isotemp Series User Manual page 49

Table 7-2 Display Features
Feature
The table below contains brief descriptions of the menu bar icons (item D2 in
.x
Table 7-3 Menu Bar Icons
Icon
Fisher Scientific
Function
Display pane showing a permanent readout of the actual tem-
perature in the work space either in °C or °F (depending on the
user's preferences, see
on page 7-12).
A flashing time entry prompt of the general format
(hours:minutes, both with two digits) appears in this place while
the user is setting up a timer.
Upon occurrence of an error condition, the current error code
flashes in this area. Additionally, the red alarm icon at D3
flashes.
Menu bar with iconized representations of adjustable parame-
ters. A red border is used to highlight the current menu item, as
selected using the
descriptions of the individual menu items are given in
below.
Note If a menu item cannot be selected, then the function it represents is not
part of the equipment configuration of your unit.
Alarm icon: Upon occurrence of an error condition, the red alarm
icon will be illuminated. At the same time the current error code
will flash in the display pane. The alarm may be acknowledged
by pressing the
Function
Temperature Set Value
Allows for changing the temperature set value within the permissible tem-
perature range. The set value can be changed by pressing the
Right
and you can, after confirming your changes with the
button , track the impact on the actual temperature in the display pane.
Instructions: "Temperature Set Value"
Timer
Allows for having the oven turn on and/or off upon expiry of a user-speci-
fied countdown period. When the user enables an "on timer" the oven
goes out. A rotating in the
cator icon in the status display area indicates that the timer is running.
Instructions: "Timer"
Settings
Invokes a submenu with the following functions:
- Read access to error log
- Calibrating the oven
- Toggling the temperature display unit between °C and °F
- Entering a configuration control code
(Instructions: "Settings"
"Toggling the Temperature Display Unit"
and arrow buttons
button.
on
Timer icon and the illuminated readiness indi-
on page 7-8.
on page 7-10)
Gravity Convection Incubators
Handling and Control
hh:mm
and . Brief
table 7-3
figure
Left
Menu/Enter
page 7-6.
7-1).
and
7-3